FS: Lot's of Parts...Engines, and More...

FS: Lot's of Parts, and More...

Feel free to PM me here, or e-mail [email protected] for more info, or details etc…
All prices are negotiable, plus shipping; however I will absorb the 3% paypal fees. Preferably you can send money as a "gift" to save on fees.


Procharger F1-C head unit. (Brand New)
- Comes with F1 series main bracket, tensioner, and 3.7” 12 rib pulley.

Whipple/BlackDiamond Monoblade Throttle Body
- Complete with TPS, and actuator motor. Like new condition

New price is $3500 for both + shipping.

This is the short list guys. More stuff will be added later.


Thanks for looking,
Brian

PM'ing you about the shocks.

Pm sent on LCA, bumpsteer and shocks

Will that throttle body work on a Kenne Bell setup?

SUHleen said:

Will that throttle body work on a Kenne Bell setup?

Click to expand...

I'm not sure if there is a fitment issue on a KB with it or not. Hopefully somebody with a KB will chime in for you.
I got it from a buddy that ran it on his Whipple car for a while with no problems.
I run a Procharger, and never got around to installing it on my car.

Hey man, would you cut me a deal if I picked up all the Procharger pieces, the dual BAP, and the BA5000?...If you have an idea or would like to consider this, you can shoot me a pm?

Thanks man!

pm sent.

Chris06GT said:

Hey man, would you cut me a deal if I picked up all the Procharger pieces, the dual BAP, and the BA5000?...If you have an idea or would like to consider this, you can shoot me a pm?

Thanks man!

Click to expand...

I'm definately interested in local pickup. Are you or someone you know going to be in Alberta? I'll be back home on the 21st.
You would be second or 3rd in line for the BAP, but the Procharger, and BA5000 have not be spoken for yet.

Post #1 updated. A few of the smaller items are pending sale.

Payment sent for bumpsteer kit.

Who built the short blocks?

ZmanM3 said:

Who built the short blocks?

Click to expand...

Shortblocks were machined, and assembled local to me by ...
http://www.campbellautomotive.com/
They are highly respected as one the best racing engine builders in western Canada. The engine that is in my car now was also built by them, and has been flawless for the last 2-1/2 years at 18psi boost.

Here's a couple examples of their work...

http://www.youtube.com/watch?v=7a56rFcgaxs

http://www.youtube.com/watch?v=c1LOjqImsqA

http://www.youtube.com/watch?v=SFI-72OXEm4

http://www.youtube.com/watch?v=Pub1lVMH3gU

http://www.youtube.com/watch?v=D2uTuUkNBdo

Sent you an email re: the heads

DirtyDogOfTheDesert said:

Shortblocks were machined, and assembled local to me by ...
http://www.campbellautomotive.com/
They are highly respected as one the best racing engine builders in western Canada. The engine that is in my car now was also built by them, and has been flawless for the last 2-1/2 years at 18psi boost.

Here's a couple examples of their work...

http://www.youtube.com/watch?v=7a56rFcgaxs

http://www.youtube.com/watch?v=c1LOjqImsqA

Click to expand...

Thanks for the info, I need to think on this.

Back to the top...

A couple other small items I forgot about are...

A set of Metco fuel rails. Bought them from a member here but never installed them.
Asking $100 + shipping SOLD


SOS center dash gauge pod. This is the tripple gauge mount offered by SOS. It is brand new never installed
Asking $100 + shipping SOLD

Thanks for all the interest so far guys.

DirtyDogOfTheDesert said:

SOS center dash gauge pod. This is the tripple gauge mount offered by SOS. It is brand new never installed
Asking $100 + shipping

Click to expand...

Is this the one that goes on top of the dash? I sent a PM already but if it is I'll take it.

is shortblock #1 a forged crank? says 8 bolt but also cast?

I'am interested in the heads and shortblock #1 or 2 -which ever has good crank.
make it a long block, ready to drop in and go!!!

2005mach1 said:

is shortblock #1 a forged crank? says 8 bolt but also cast?

I am interested in the heads and shortblock #1 or 2 -which ever has good crank.
make it a long block, ready to drop in and go!!!

Click to expand...

Yes, you read right, engine #1 has a cast crank that has an 8 bolt flange. It also has knife edge counterweights, and is actually a pretty nice piece.

Engine #2 has a forged cobra crank in it, and is .020 over. Both have the same forged JE 9.3:1 pistons.

Putting either of them together with heads etc can be done now problem.

Post 1 updated again. F1-C is now pending final sale.

Thanks to those that have bought stuff, or showed interest.

Have patients with me if I'm slow to respond to PM's over the next couple days. I'm traveling, but will respond as quickly as I can when I get back home.

Brian

I cleaned up post #1, and added a few photo's. Engine #1 is in the crate, #2 is on the stand. They look basically the same. Same pistons etc... I can arrange for better detailed photo's as interest dictates.