Fore Innovations 3V Fuel Rails

tmcolegr · Oct 1, 2012

How many of you are using Fore Innovation's 3V Fuel Rails and Extended OEM Fuel Line Adapter & Crossover Kit with a returnless fuel system? Any fitment or performance issues in any application? More specifically, how about with a Saleen S/C?

PS: Not asking about Fore Performance 3V fuel rails.

JeremyH · Oct 1, 2012

We are a vendor for them and I just installed them on my setup in a returnless config with the crossover/stock line adpator kit. Havent seen or gotten feedback on the saleen blower setup specificly. For me, fitment was excellent with the Jpc intake and I like how it all fit. The crossover comes longer so you can route it how you want, either behind, down under or up over the back and the hose ends are swivel making it easy to angle it how you want. I went basicly straight and slightly under across the back and trimmed about a foot off of the crossover for my install.

Here are some pics on my setup so you can get an idea of how they fit. I dont have the stock line adaptor installed yet on this pic but it has a billet 180 fitting that the adaptors screws into at the front of the drivers side rail.

crownaviation · Oct 1, 2012

They are really nice rails. Definately a quality piece.

Not exactly sure how your Saleen is setup and how much room you have behind the blower and how your alt is configured. I imagine you could manage to get them to work if not you could always get the majority of your money back. Fittings add up quick tho and that wont bring much return if it does not work.

Mine is on a DOB intake and I had to massage the drivers side rail some as I chose the shorter EV14 injector. Pretty sure this would be specific to my setup as far as height above the manifold. On other setups with the alt relocated the alignment would be the same and I did not have any issue with the rail being too far forward.

Mine are setup returnless right now and was simple. I used a metco adapter at the passenger side rail. I used a quick disconnect (threaded)and that was nice as I am always tinkering. The stock plastic fuel line from frame rail was cut off and tossed. At the frame rail there is a stock quick disconnect similar to the one at the stock fuel rail. I reused that and they are a PITA to get off BTW. I chose this setup so I could route my crossover to the back of the SC to clean it up some.

tmcolegr · Oct 2, 2012

I had the opportunity to talk to Justin @ Fore Innovations today. The current configuration 3V OEM Fuel Line Adapter & Crossover kit listed on their website will not work with the Saleen supercharger. The crossover line is routed from the rear of the driver's side fuel rail into the rear of the passenger's side fuel rail. For those of us with a Saleen S/C this poses a problem as the rear of the passenger side fuel rail is obstructed by the boost actuator.

However, Justin has already resolved this issue

http://www.foreinnovations.com/product_p/9-907.htm

I ordered this new kit today from Jeremy @ S&H Performance

JeremyH · Oct 2, 2012

tmcolegr said:
I had the opportunity to talk to Justin @ Fore Innovations today. The current configuration 3V OEM Fuel Line Adapter & Crossover kit listed on their website will not work with the Saleen supercharger. The crossover line is routed from the rear of the driver's side fuel rail into the rear of the passenger's side fuel rail. For those of us with a Saleen S/C this poses a problem as the rear of the passenger side fuel rail is obstructed by the boost actuator.

However, Justin has already resolved this issue

http://www.foreinnovations.com/product_p/9-907.htm

I ordered this new kit today from Jeremy @ S&H Performance

Fore has 3 crossover kits now. Stock intake, aftermarket intake, and blower to fit your needs. Left you a message Todd, I was a little late working on the car and didnt get you in time.

crownaviation · Oct 3, 2012

tmcolegr said:
I had the opportunity to talk to Justin @ Fore Innovations today. The current configuration 3V OEM Fuel Line Adapter & Crossover kit listed on their website will not work with the Saleen supercharger. The crossover line is routed from the rear of the driver's side fuel rail into the rear of the passenger's side fuel rail. For those of us with a Saleen S/C this poses a problem as the rear of the passenger side fuel rail is obstructed by the boost actuator.

However, Justin has already resolved this issue

http://www.foreinnovations.com/product_p/9-907.htm

I ordered this new kit today from Jeremy @ S&H Performance

Nice! I am sure they will live up to your expectations! Simple to swap them to return system down the road if/when the time comes.

Pics when you get them done...

Bobby · Oct 3, 2012

You will never go wrong with anything fore

tmcolegr · Oct 12, 2012

So here's a picture of the Fore Innovations fuel rails installed with an upgraded AN8 fuel supply hose

Here's a thread on how to upgrade from the OEM flexible hose to a AN8 hose

crownaviation · Oct 12, 2012

Looks good! I like how you mounted your aftermarket fuel sending unit too.. I always like seeing what you come up with!

Fantas · Oct 12, 2012

I am running them on my machine. Couldn't be happier.

05stroker · Oct 12, 2012

I like them as well! Couldn't be happier with a set of rails.

Chilliwack 42 · Oct 17, 2012

tmcolegr said:
So here's a picture of the Fore Innovations fuel rails installed with an upgraded AN8 fuel supply hose

Here's a thread on how to upgrade from the OEM flexible hose to a AN8 hose

Is this the fitting that attaches to the hardline? http://www.summitracing.com/parts/RUS-644133/

tmcolegr · Oct 17, 2012

Chilliwack 42 said:
Is this the fitting that attaches to the hardline? http://www.summitracing.com/parts/RUS-644133/

that one should work

be forewarned, that screw in retainer is a PITA to install, but once it's in place the line won't inadvertantly pop off of the hard line. You'll see what I mean when you install it.

Chilliwack 42 · Oct 17, 2012

Thanks man, I might end up doing this when I get some fuel rails this winter.

Bobby · Oct 17, 2012

just let us know when you are ready and we will hook you up with a set.

Barricade · Oct 25, 2012

Its my understanding that a 45 angle will get around that fuel actuator on the Saleens.
Has anyone else seen this?

Fore Innovations 3V Fuel Rails

tmcolegr

It's All About the Build

JeremyH

3V Fuel Guru

crownaviation

http://www.tudyno.com/

tmcolegr

It's All About the Build

JeremyH

3V Fuel Guru

crownaviation

http://www.tudyno.com/

Bobby

turbo gt about to go fast

tmcolegr

It's All About the Build

crownaviation

http://www.tudyno.com/

Fantas

Member

05stroker

Never enough power guy!

Chilliwack 42

Member

tmcolegr

It's All About the Build

Chilliwack 42

Member

Bobby

turbo gt about to go fast

Barricade

Decepticon Extraordinaire

Similar threads

Latest posts

Support us!