Recent content by 06iornhorse

SOLD

Texasb u r next in line just have to wait and see, but im pretty sure dillon is going to pick them up on friday.

at this time the tires are sold unless dillon falls through on friday

No prob just trying to pass on some good stuff that I'm not using any more for a fair price. My whole nitrous setup will be coming off the car soon as well, have everything you need for it from 2 bottles, heater, purge, hsw nozzle kit, hsw nitrous controller and autometer cobalt nitrous gauge...

Sold to dillon pending payment on friday

Maybe Hillsboro where r u at? On 35

i do live in dallas and looking for local pickup I might meet you towards van alstyne but that would be my limit

I have a pair of 17x9 inch bullets w/ 26x11.5-17 with two 1/8th mile passes, then hard times came and had to quite racing. $300.00 local sale only dallas tx. SOLD!!!!!

I dump at 6500 rpms spraying out of the hole

Hell I'm running 1.5 60's all day long I would say there is tons of improvement to be had on those 60's.

At 75 mph I'm only at about 2700 rpms I average 300 mpg mixed driving and about 345 highway at 70 mph

It's the slave cylinder I'm on my third one now. The ram pghd's pressure plate is to stiff and blows them out over time so I switched to a p51 and factory pressure plate and got another factory slave cylinder and problem fixed

simple answer is yes 116 did that and killed my o2s mixed with 93 only after one time tank was empty and mixed 2 gallons of 116 and 2 gallons of 93 and that was all they wrote code showed up a week later. leaded fuel kills o2s stick with unleaded 104

will you be updating the 1/8 mile spread sheet anytime soon.

i say swap the solenoids it takes five minutes at the most and you get a code p0022 its the solenoid. this is what the problem was with my car two weeks ago. do this before replacing the phasers as you really cant tell if they are bad unless the pin holding the spring broke. but at the same time...