Search results for query: *

  • Users: sevenleaf
  • Content: Threads
  • Order by date
  1. S

    Used Interceptor gauge 2005+ Mustangs

    Gauge doesn't work with 04 cobra's so I'm selling it $150.00
  2. S

    I guess I only have 2 weeks left here!

    So after having all the transmissions problems with my car I have to throw the towel in. No one is able to tell me what the problem is with my car. The car runs awesome now but who knows for how long. I paid to have a 2004 Mystic Chrome Cobra transferred to a dealer today. If everything...
  3. S

    Removing Starter Need some help

    How in the world do you get to the top stater mounting bolt? I removed 2 of them and can't even see the 3d one. thanks in advance.
  4. S

    Broke trans again anyone want a car ?

    I give up with this piece of shit car and will putting a stock transmission in and passing it over to someone else I give up. Drive shaft doesn't spin not 100% sure of the problem but doesn't shift in any gear same ol same ol I give up don't want it anymore This time it broke 90 miles from hom...
  5. S

    Possible AC problem signs?

    Should I be looking out for something? I noticed a lot of condensation on these 2 lines and I did not have the AC on when I took the car out for a 15 minute drive today.. I did have the heat on
  6. S

    Broken Saleen blower with pix!

    So 2 days ago I lost boost and heard a bad metal sound coming from the blower. I pulled the blower off pulled the snout off drained the fluid and started messing with the rotors and after I notice they are a PITA to get out I call saleen who tells me they won't warranty anything since it...
  7. S

    Header bolt question

    So I think my problem might be related to the passanger side header. I took a tube and placed it all over the motor and blower and the only spot the sound really increases is the passanger side header. So I decided to pull the header off and check the gaskets. I got the header under bolted...
  8. S

    Need some help P2135

    So I just swapped out the fuel pressure regulator started driving and not even 5 minutes later I got the P2135 code. Anyone ever get this? should i have reloaded my tune with my xcal first?
  9. S

    Need new inlet tube!

    Ok, My second carbon fiber inlet tube from steeda is starting to wrinkle in the exact same place as my first inlet tube. Underneath the clamp at the throttle body. There isn't a problem on the other end and I tighten that just as much if not more then the throttlebody end. Can anyone...
  10. S

    Aeroforce gauge and Fuel pressure ?

    Anyone with an aerofroce gauge datalog the Fuel Pressure? When I'm crusing around town and hit the throttle say 60-80 % the fuel pressure dips from 39 to 32 then right up 49 - 59 depending how far you go down on the throttle My question is does your gauge dip down like that? My autometer...
  11. S

    GT500 Fuel system problem!

    So get this just my luck, I'm about half way between a quarter and a tank and half tank of gas. I start to get onto the highway and give it some power next thing I know my gauge drops to E the car is almost out of gas. Go to the pump fill up only 10 gallons to fill, obviously the rest of...
  12. S

    Saleen Info

    Outgoing Saleen, Inc., CEO Chris Theodore confirmed for Inside Line on Tuesday that MJ Acquisitions has acquired some of Saleen's assets, including the supercharger, aftermarket and high-performance street vehicle business. "I have to go on [to other things]," Theodore said. "I just wanted them...
  13. S

    Have you seen this symptom?

    This morning I started my car and as I pushed the throttle down the car would tip in lean then back to normal. I get to the gas station, run in buy a mnt dew go back to my car start it up and the car is absolutly perfect for the 20 minute drive to work. Thanks -Sevenleaf
  14. S

    Can this cause a vac leak?

    You can see the rubber gasket under the valve cover and today I noticed if I give that rubber piece a slight push down it is separated from the head like it got torn away. Could this cause a vacuum leak? Thanks in Advance
  15. S

    New Dyno Sheet with 3.2 pulley and GT500 Throttle Body

    Here is my new dyno sheet. Here is the old one with 3.4 pulley and stock throttle body
  16. S

    Anyone break a driveshaft?

    ok I searched a few forums and google but couldn't find a good answer. Has anyone broken a stock drive shaft or bent it? Do GT500's use the same piece? I haven't upgraded my driveshaft and not to worried about cutting any time of my ET. Just wondering if they have been bent or broken.
  17. S

    Most Boost seen with Saleen SC?

    I'm just curious the most boost people have seen with a Saleen blower? I know most people know the problems I have been having with all my wiring and vacuum leaks bent tensioner and shit breaking so today I took the car out for a drive, it's about 33 degree's outside which it has been before and...
  18. S

    Another issue lucky me squeak

    so I now have a new problem I'm not sure how to exactly figure it out so I'm looking for advice. Soon as I fix one issue another pops up go figure. When I start the car cold I got some bad squeak going on I am having a hard time trying to figure out where it's coming from. What can I do to...
  19. S

    Interesting Problem Fixed

    So the past week my coolant has been seeing 220 going from 190 back and fourth I started to get worried. Checked the new thermostat I installed found no problems. By chance I hit the TPS pigtail and the car died. WTF Turns out the wires in the TPS pigtail were loose and severed. Could not see...
  20. S

    Ordered Fore Precision Works 05-09 Mustang GT High Flow Fuel Rail Kit

    Any comments on these fuel rails? I noticed I must have dropped wrench or something on one of the rails and it left a little indent so instead of buying new stock rails I decided to upgrade.
  21. S

    Need picture please help

    Can someone please take a clear picture of the wires coming from the MAF harness like which wire plugs into the far left side and so on, I know the 2 far are gray and gray/red I need all the others... Greatly appreciated!!
  22. S

    Need some help! Car dies

    I installed a 160 degree thermostat today and the install seemed to go alright. Now for some reason when I revv the car in netural the car dies/cutoff's. If I get on it while the car is in drive it goes very lean, I DID not have this problem before I did anything. I did spring a leak at the...
  23. S

    SCTFlash's drawing second place!

    I just wanted to say I was so close to winning a 2 page feature of my car missed it by one!! Oh well Hi Tim, As I am sure you have seen the in the December issue of Muscle Mustangs & Fast Fords you have won 2nd place in SCT's Customer Gallery draw. I just wanted to get in touch with you and...
  24. S

    FS: Misc Items

    For sale: Saleen Extreme inlet tube with adapter. Stock GT throttle body. Saleen SC 3.4 Pulley. Saleen SC 3.6 Pulley. Mustang GT Over size Water pump pulley. Best offers Send PM.
  25. S

    PI Torque Converters and flexplate

    If you have a PI torque converter are you using the stock flexplate or did you replace it?

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top