Search results for query: *

Traded the fiancee's 2012 6'er, with 133k miles on the clock, for a 2015 Comp Orange Ecoboot 6M this past Saturday. Long story, short.. She found 'the' one all the way out by her parents place 4.5 hrs away. She then convinced me to tow her 6'er 4.5hrs out to the dealership and tow the Eco back...

Trading in the 2012 6'er on a 2015 EB next weekend, so we demod'd her as much as we could. I take PayPal and will eat the PayPal fees. 3.7L Borla ATAK Axle Backs - $475+ shipping One rub mark that cannot be seen once installed. The black spots are road grime that should come off with a good...

Acouple pics from Carlisle 2014. Otw there Misc hotel / on the field pics We (Bad Pony Club) won the Coolest Club Hangout award this year! Had a blast and took home a few trophies too! Cannot wait till next year!

Cleaning out the garage again. 1) Stock 2005-2009 tail lights (no harness or bulbs) $45 + shipping 2) Medium tint 2005-2009 tail lights (no harness or bulbs). I did them in VHT > Clear a few years back. They're not perfect, but I cannot pickup the imperfections with the camera. SOLD Acouple...

The 'other-half' finally had the hood spears installed on the 6'er. ..she's only had them for 1 1/2 yrs. I'll get some more pics after she gets her all cleaned up.

Collection of stuff I have left still for sale with prices lowered. ***I'm going to Carlisle All Ford Nationals June 6th through the 9th and can meet anyone there, so they wouldn't have to worry about shipping.*** :beer: All parts came off my 2008 GT 5spd Manual. Coast HD Alum Drive Shaft w/...

Finally got new meats for the rear! Comparison of the 285/40R18 GoodYear F1s.. No idea what happened to the tread on the GY's.. the fronts are fine. :lol2: Bringing them to my buddy over at DNA Motorsports. With the BakFlip closed, they barely fit in the Raptor's bed. I have the no...

Cleaning out the shop some more and the T56 Magnum install is finally finished. Mustang Steering Wheel - SOLD *cruise buttons light up the OEM green color Coast HD Alum Drive Shaft w/ adapter plate - SOLD About 4 yrs old with roughly 20k miles on it. The rubbing you see was from when we...

Cleaning out the shop and found some stuff to sell. More to come. CFM Performance Billet Oil Cap Breather - SOLD K&N Oil breather kit for 2005 - 2010 Mustang GT - SOLD I think this is a UPR Oil / Air separator - SOLD Hoping to get more stuff listed as I clear out the shop and then...

I haven't had a single email notification in the last 24hrs. I didn't change anything and it's not showing up in my email spam folder either? Did something change? ..or did I screw something up? Thanks, Jason

Up for sale is the Carbon Fiber JLT CAI from the 2012 6'er. I bought it for her about a year or so ago. Turns out she likes the look of the AirRaid one better.. so I picked up one of those off the boards here alitle bit ago. Installed it for her Tuesday and now this one is up for sale. I...

After 22 weeks of waiting, I finally picked up my Raptor last night!!! I absolutely love this truck!!! Here some ****ty Cell pics I took. Hoping to get some better ones today on my lunch. ..and when she first arrived at the dealership.

I know this one has been beat to death and I've been searching this forum and multiple other forums looking for an answer with no luck. :mad2: Symptoms: I have a clunk / pop on the passenger side of my 2008 GT that has been there for years.. It only happens when going over a speed bump or up /...

Picked up a set of 2012 NTO Leather seats from Shelby garage sale a couple weeks back.. only problem, they do not come with headrests! ..and the 2011+ Mustangs have 4 headrests!!! Luckily a member on here from Philly had the rears from when he converted his 05. Thanks Alec! ..so that just...

Got the itch to go racing and the weather FINALLY cleared, so we shot down to Cecil last night. We brought our 8yr old son, so we had to leave around 8pm. ..hot lapped both stangs and ended up doing 5 runs in less then 2hrs. :mad2: She drove the 6'er and her times ranged from a worst of 14.5 @...

After almost 4 months of having the hood on my dinningroom table, she's finally painted and installed.. Some quick pics taken today, at work. The specialty fab/paint/body shop couldn't say enough good things about this hood. One of the best after market hoods they have ever worked...

I've always wondered why Ford didn't make all of our LEDS shift with the MyColor.. It always seemed 'off' to me that I had my dash Dark Blue (to match the car) and everything else was Ford green... it made it even worse when I installed the Cobalt gauges. So I decided to contact Ron...

It came time for me to either 'recharge' or replace the air filter on my Whipple and sense I don't like the clean then re-oil approach, I started looking into replacement filters and I finally found one I like. The Amsoil EaAU6080 is a perfect fit on the 2005 - 2007 FRPP/Whipple...

Had a short stint of nice, warm'ish, weather this past Saturday so we took two of the stangs out for a spin. I'll post up some video's as soon as I get them edited / shortened.. the person taking them was a tard. ~j

I have a set of used CHE drop brackets I picked up awhile ago and never got around to installing. I have all the CHE rear suspension pcs but the Pan Hard bar and she's hook pretty well at the strip and on the street... I'm happy with the ride as well, so I don't think I need to install these...

Ford OEM 17" Split Spoke Alum wheels, w/ TPMS stuffs in tact, & OEM Pirelli tires. $400 They have never been disassembled and have the OEM weights still on them with no vibration issues. Were on the GT for less then 8 months, have less then 9k miles on them, were raced acouple times (w/ no...

Ford OEM 17" Split Spoke Alum wheels, w/ TPMS stuffs in tact, & OEM Pirelli tires. $400 They have never been disassembled and have the OEM weights still on them with no vibration issues. Were on the GT for less then 8 months, have less then 9k miles on them, were raced acouple times (w/ no...

I just installed a Whipple and have a few things I can no longer use. - FRPP 'Bullitt' strut tower brace: SOLD Thank you - Ford OEM engine cover: I purchased this shortly after getting my stang in Nov 07. No rubs or other marks I can find and is basically brand new looking. $50 +...

Like the title says.. I have a brand new BMR Tunnel Brace and DS safety loop for sale. I originally bought it off another member / vendor for my stang with some other parts. No longer need it to pass tech at the track because I bought a Coast 1pc Alum DS. It's listed on BMR's site for $149.95...

Picked up my DS & DR's Saturday from Tillman Speed and installed the DS last night. Thanks CR! Install took around 3hrs of BS'n and double/triple checking everything. It wasn't that hard at all and we only ran into one issue. The BMR Frt DS Loop's lower bracket wouldn't fit with the...