Search results for query: *

Thank you for taking time to respond. I will look at that if problem remains.

So I just swapped the high and low fan relays to the horn spot and both of them made horn work. So fan issue prob not a relay issue. I am going to put the alternator in tuesday and see if that stops anything. Not sure if maybe the water pump or pump bearing?

I just switched the high with the low and vice versa. So I do not know which one is bad. I think I mis understood you on that for testing it. When the fan was not being loud after I switched them, I heard noise from accessories, put long screw drive to alternator and sounds like that bearing is...

Good day, Is this possible on a 2007 mustang gt? Getting a-lot of noise from alternator. One of my fan relays went bad. Not sure if related. Do I have to buy the whole alternator or can I seap out the bearing? Thank you!!!

Relay swap seemed to respond. Thank you!

It does it without the AC on. And with it on. Where are the relays located that you speak of?

Good day all! Wondering if anyone can please help me out. 2007 mustang gt upon start has the radiator fan sound like a jet engine. It is very loud. Any ideas? Just started yesterday.

Any recommendations besides fluid film to prevent salt from eating underneath? Thank you!

Good Day! Any opinions on rust proofing a 2007 mustang for the winter? Besides getting a beater. I requested a quote to have the underside coated with por-15. Is this worth the money? Generally, I use fluid film on previous vehicles. But have not kept one to see the results. Input welcome...

Hello all! I was doing some reading on 4:10 swap. One thread mentioned I might be able to swap out the housing instead of having a shop install gears in current rear end. I would have shop install this https://lmr.com/item/LRS-4209FRC-K/Mustang-88-410-Ratio-Rear-End-Gear-Kit or would I be...

Thank you for the heads up on this!

Good day all, Going to order BMR UCA, mount and LCA in links below. Question is what additional poly bushings will I need to complete this job? Looks like the UCA comes with one side with bushings. The mount with a bolt. Does anyone have a link for a poly bushing that connects to rear end? I...

They were made by TRQ. Put them in last weekend

I did the rear shocks first and immediately noticed the car got up and moved forward, big improvement of acceleration. I think I am going to go with the bmr non-adj UCA, new mount and LCA. See how that feels. Had them on my old 2006 and felt an improvement then. People have mixed opinions on the...

I replaced all the struts and shocks with stock height parts. I was thinking either rear LCAs, UCA and rear sway bar or spring for the watts bar. The videos make the UCA look not too bad, but I heard read differently. Down the road when I get use out of the current suspension I will look into...

Hello all, 2007 Mustang GT After current work, no more clunkin, accelerates better, but is a little floaty/bouncy. I want the car to be less bouncy and feel planted. Handle curves better. All recently installed new: gt500 A arms w/ bjs and bushings stock height struts Rear stock height shocks...

Will I have the same issue with mount going bad or you think it will hold up for a while?

Any thoughts on these two below with gt500 mount and stock springs? From american muscle Ford Performance Dynamic Shock and Strut Kit Item 50525 https://www.americanmuscle.com/frpp-shockstrut-0514gtv6.html or Roush Front Struts Item 404860...

Is there anyone recommended that someone on this forum has used?

With all the info I got on here. I think I will upgrade to the gt500 strut mount. And not lower it. I will look into that down the road. So I guess my question now would be, should I go OEM strut or is there a good aftermarket one I can swap in while I have it apart? Not doing any track stuff.

Sorry I suck at being concise. Basically seeing what parts I would need in addition to any kit that lowers the car, ex...adjust panhard rod bar... Or what strut I can put in if any(oem included obvi) and replace my strut mount with gt500 one.

I replaced front LCAs with gt500 ones w/ upgrades bjs and bushings. New swap bar end links and bushings. Had significant clunking and this all helped. Have bit of clunk still. Thinking I need to upgrade gt500 strut mounts. But since I'd have to take out the strut, while I am in there, I wanted...

Thank you for the info! Is there a kit or combo that does not lower the ride height? Maybe a strut I can use with the stock springs? So I can avoid changing the panhardbar and/or LCA. In reality I just need to replace the strut mount with a gt500 one. I can see if I can get some help with the...

Good Day Everyone, I am looking at the Pedders SportsRyder EziFit Spring and Shock Kit. It says it will lower 1 to 1.5”. I am interested in this kit since it appears I won’t need to use a spring compressor. My current strut mounts are making a clanking noise. Looking to see what I will need...

Good evening, Is it possible to get a custom tune through another company for a bama rev x tuner (sct)? I have 07 gt with jlt series 3 cai. thank you!