Search results for query: *

C&L Racer CAI without the heat shield. I bought it used from peetiewonder and haven't even bolted it on yet. I upgraded to a JLT series 3 so I'm selling this exactly as I bought it. It's used and could use a filter cleaning, and has one small wear/rub on the MAF, but is in overall great...

I have a part of theirs on my mustang and it failed. This part had been on for awhile, longer than I would've expected a replacement for even though it was a possible design issue. I called just to ask a few questions, to see it it was known. I was asked to send some pictures, then was...

I searched, but was likely using wrong term as I found nothing I saw relevant. Background: I started my car after sitting a day and it just clicked. I threw the jumper box on and it started right up, I assumed it was the battery. Autozone ran their portable test on it and it showed...

I hope this is the right place to put this... I'm kicking around the idea of building a 400hp rotary for a 2500-3000 lb car I have. It is currently just a stripped chassis so everything will have to be fab'ed and wired. How much does it cost to build one up to 400? what are the known issues...

I noticed the inside of my rear tires were wearing way more than the outsides. I was involved in an accident a year ago, and assume maybe it didn't get fixed correctly. Is there anything alse that can cause this uneven wear? I'll try and find the alignment sheet from right after the...

I hope this is the right section, there's pics of my stuff, moving on... I Decided to rebuild my front calipers (Wilwood 6-pistons) because I had some very uneven pad wear. When I bought the car I pulled the passenger wheel off to examine the calipers and pads and while it was getting low, it...

I took my car to the dyno today to get some numbers to see what the pile of crap I added to my car made. I used the same dyno, nearly identical conditions. See my earlier thread for the baseline dyno: http://www.s197forum.com/forum/showthread.php?t=70370 Summary of baseline: 313.4 rwhp @ 5200...

What do you all use? I've recently been looking into this as I just realized there are cheaper alternatives to the expensive race setups. I saw the TrackAddict HD one and it looks promising. Supposedly you just need to invest in the $7 app, an add on GPS for your iphone, OBD2 bluetooth for...

An exhaust comparison video of before and after my cam installation. g_yAC57owC8

I'm planning on heading to Barona 1/8 mile drags soon and am looking for some advice on launch and suspension setup. I've only been to the track once, (before headers/cams) and that was at Qualcomm which has no prep or traction what so ever. I ran: 60' 2.4xx 1/8 9.1xx Mph 81.xx 1: I dont...

I took a quick video of my car while it was still on jack stands after my cam and JBA shorty header swap. ZjAzRhh0wH8 I was missing the bolts for header to x-pipe collectors and didn't want to wait so I started it anyways.

I was doing a quick Flyby video for my pre/post cam install video and decided to stop and take a few pictures with my cell phone. Sorry Faye is such a dirty whore, she needs a bath! And the Video I quick edited today: 8G-6scdbQcw

C&L Racer CAI without the heat shield. I bought it used from peetiewonder and haven't even bolted it on yet. I upgraded to a JLT series 3 so I'm selling this exactly as I bought it. It's used and could use a filter cleaning, and has one small wear/rub on the MAF, but is in overall great...

I ran across this company while browsing flea-bay today. Has anyone heard anything about them? http://www.stargalaxyinc.com/ http://www.ebay.com/itm/SGI-Forged-4340-H-Beam-Rods-Ford-283-5-850-4-6L-5-933-/150635474343?hash=item231292eda7&item=150635474343&pt=Race_Car_Parts&vxp=mtr They have...

Anyone running wilwood pads? I'm doing a rotor/pad/fluid change because its needed and to prepare for an upcoming track day at willow springs and was looking for pad recommendations. I was considering using their BP-10 for the street and stepping up to either the BP-30 or B pads for the track...

where did this come from? To make it drift appropriate, where are you guys drifting in socal and what tires are you using? Oh and Dibs on first post!

Calling all speed junkies! I will be heading out to WSIR with Allan Crockett's company http://www.opentrackracing.com/ March 14, Fee's $155 if registered before 14 days out. Anyone want to head out with me?

I've searched and cant seem to find an answer. I could've just search the wrong key word so if this has been covered sorry. I have this clunk that seems to come from the area in front of the pedals or maybe the bell housing. It doesn't happen every time but when it does it only clunks once...

I have a question regarding what shock settings to run but I also went to the strip for the first time so I'll post em together. Qualcomm RT 0.895 I blame narcolepsy... 60' 2.4xx 1/8 9.1xx Mph 81.xx Nitto NT555 275/40/18 street tires @ 20lbs first time out at the track. Slow! Hot rod cams...

I searched but couldn't find anything that answered my questions. I'm currently running 3.55 gears but will be putting in hot rod cams and am worried about drivability with my current gears because the miss's occasionally drives the stang to work in heavy traffic. I have a spare set of 4.10's...

Rain, Rain, Go Away!!! :angry1:

I know numbers dont matter, but seeing what you guys think I might be running. I'm getting a baseline before I install my pile of paper weights I have in the garage; JBA shorty headers, FRPP hot rod cams, BBK o/r x-pipe, C&L racer intake, & 62mm TB. Then I'll get an after an see what Hp/Tq I...

Hello everyone, my name is Mark and I'm addicted to cars and going fast. I live in rural San Diego County, Ca. I work as a Firefighter/Paramedic. I have a small stable of vehicles. - 2007 Mustang GT Manual, Barber Driving Expirience Edition #3 - 1973 Ford F-100, 360 FE, 2x4, Long Bed Single...