My driver side back power window goes up or down only a little when I press the switch. I have to press the switch three times to fully open or close it. Passenger side is fine.any ideas thanks
I did this mod.with a pac interface. There tech support was awesome. Alot of it is having the settings on the interface matching your stereo. They were very helpful and patient with me
The wpt 440 goes on the bottom left of the steering column and the other with 440 goes under the horn on the bottom.when you connect to the wpt 440 you connect a wire from the swc to one wpt 440 and the other wpt 440 runs to the pac unit. Just make sure you use the same wire location on both wpt...
My pac was different than the one in that post. It was a pac swi-rc-1. Which has no loops or resistors necessary. I connected the yellow wire with the built in fuse to the yellow wire on the radio harness.which is always live. I connected the red wire to the red wire of the radio harness...
I used a 2012 steering wheel. With my interface I connected the yellow wire to constant power the red wire to keyed wire one black wire to ground and the other black wire to swc ground the purple wire to the white wire. The blue wire to black white of the inter face. Programming the interface...