Simple many times works best, even if it isnt as "pretty". I like this ideaNot worth the money IMO.
Mine's a simple DIY black plastic job that fills the void between the evap system and the rear bumper cover. This substantially reduces the amount of air that stacks up behind the bumper cover and potentially reduces drag, especially at higher road speeds.
View attachment 96298
View attachment 96299
View attachment 96300
Sorry, I'm German, no easy solutions allowed hahahaha..... look at Vanos from BMWNot worth the money IMO.
Mine's a simple DIY black plastic job that fills the void between the evap system and the rear bumper cover. This substantially reduces the amount of air that stacks up behind the bumper cover and potentially reduces drag, especially at higher road speeds.
Thanks, that was helpful. I made an almost flat front undertray, it also lowered the wind noise.C2 aero makes some good rear diffusers that even cover the evap in the rear. APR sells the front one's that extend to the sides of the front bumper. Couple that with the 2010+ extension and louvered trays, should make a difference in cooling, hood flutter and stability on the road
C2 aero makes some good rear diffusers that even cover the evap in the rear. APR sells the front one's that extend to the sides of the front bumper. Couple that with the 2010+ extension and louvered trays, should make a difference in cooling, hood flutter and stability on the road
No mileage compare so far, but I noticed a much smoother ride on the Autobahn with the front undertray.In addition to my DIY rear under tray, I've also done several front aero mods resulting in significantly better gas mileage, high speed stability, and NO MORE hood flutter:
My 2010 doesnt have that louvered splash shield. Now I want itIn addition to my DIY rear under tray, I've also done several front aero mods resulting in significantly better gas mileage, high speed stability, and NO MORE hood flutter:
I made one from ABS and lowered the part at the radiator support on my 07. The height difference from front to the k-member is now only one inch. Next time I order some ABS sheets I will probably change the OEM part also to make it flat.My 2010 doesnt have that louvered splash shield. Now I want it
I made one from ABS and lowered the part at the radiator support on my 07. The height difference from front to the k-member is now only one inch. Next time I order some ABS sheets I will probably change the OEM part also to make it flat.
View attachment 96645
It's the ezcarlift.com I bought it when I repaired my differential. All lift have pros and cons. Nice is I can support the engine by putting a 2x4 below it and lower the lift by millimeters. I really like it.Is that a home lift? Who makes it? What does it cost?