FS: Intercooled Vortech package

V8SRGR8

Cunning Linguist
Joined
Feb 15, 2009
Posts
326
Reaction score
5
Location
Northern Virginia
FS: Custom Vortech Air-to-Air Intercooler

Blower kit is sold! Intercooler setup now for sale!

Up for sale is a complete Vortech supercharger kit for the 05+ Mustang GT. This kit was put on my car in July 2007, but has only around 8000 miles on it. This is the V2-SQ blower currently pushing just under 8psi making 433hp/405tq at the wheels. It has a custom front mount air-to-air intercooler. I'm currently running a 3.6 pulley - you could easily make more power with a pulley change. It includes EVERYTHING you need to include 39lb injectors.

I've worked a deal with Excessive Motorsport in Manassas Park, VA and can offer this setup complete with installation and custom dyno tuning for $4400. I will also sell the complete kit outright for $2900.

I will answer any questions you have or you can call Torey @ Excessive (703)331-1422


Vortech001.jpg

Vortech002.jpg

Vortech003.jpg
 

Attachments

  • engine bay.jpg
    engine bay.jpg
    59.8 KB · Views: 76
  • Vortech 001.jpg
    Vortech 001.jpg
    225 KB · Views: 7
  • Vortech 002.jpg
    Vortech 002.jpg
    251.2 KB · Views: 7
  • Vortech 003.jpg
    Vortech 003.jpg
    232.9 KB · Views: 10
Last edited:

Steedman07

Classified's Moderator:)
S197 Team Member
Joined
Feb 4, 2008
Posts
9,246
Reaction score
113
Location
Connecticut
Im sure youve been asked 1000 times..But, if you want to part with the air to air only, Im interested.
 

V8SRGR8

Cunning Linguist
Joined
Feb 15, 2009
Posts
326
Reaction score
5
Location
Northern Virginia
Sorry guys, not looking to break up the kit, I don't want to mess around with trying to get it all sold in pieces. I will remove it from the car and sell everything for $3k if you don't want the installed and tuned deal.
 

jp's performance

shooting for 11.60's N/A
S197 Team Member
Joined
May 18, 2007
Posts
479
Reaction score
0
Location
mass
Up for sale is a complete Vortech supercharger kit for the 05+ Mustang GT. This kit was put on my car in July 2007, but has only around 8000 miles on it. This is the V2-SQ blower currently pushing just under 8psi making 433hp/405tq at the wheels. It has a custom, one of a kind power pipe and front mount air-to-air intercooler. NOBODY makes a power pipe for this kit, and I've had a lot of interest in this one. I'm currently running a 3.6 pulley - you could easily make more power with a pulley change. It includes EVERYTHING you need to include 39lb injectors.

I've worked a deal with Excessive Motorsport in Manassas Park, VA and can offer this setup complete with installation and custom dyno tuning for $4500. I will also throw in the radiator cover extensions (not shown in photo) since they were modified for this setup.

I will answer any questions you have or you can call Torey @ Excessive (703)331-1422
i had a custom 4 inch power pipe with my non cooled v2-sq with a 3.80 pulley and made 457 rw with 11.5 psi at 6500.my pipe came straight out with a 90 deg bend off the blower straight into the fender.
 

V8SRGR8

Cunning Linguist
Joined
Feb 15, 2009
Posts
326
Reaction score
5
Location
Northern Virginia
Nice pipe. Who made it for you, and how much did it cost?

Chris @ Excessive made it for me when we did the intercooler. I don't know what it cost by itself. The whole custom job was somewhere around $1000 with parts. Lots of labor.
 

V8SRGR8

Cunning Linguist
Joined
Feb 15, 2009
Posts
326
Reaction score
5
Location
Northern Virginia
i had a custom 4 inch power pipe with my non cooled v2-sq with a 3.80 pulley and made 457 rw with 11.5 psi at 6500.my pipe came straight out with a 90 deg bend off the blower straight into the fender.

How were you making 11.5psi with a 3.8? I'm at 7.6psi with a 3.6 pulley. I believe 457 at 11.5, but not that size pulley unless you were running a big lower or something.
 

jp's performance

shooting for 11.60's N/A
S197 Team Member
Joined
May 18, 2007
Posts
479
Reaction score
0
Location
mass
How were you making 11.5psi with a 3.8? I'm at 7.6psi with a 3.6 pulley. I believe 457 at 11.5, but not that size pulley unless you were running a big lower or something.
it had 3.80 stamped right on it.stock lower pulley.i pulled it to 6500.my dyno runs went like this.1-457rw-417 rwtq,2-454rw,3-451rw.i quess you could call it a freak of nature.i did put on 60# inj and 3.60 pulley and it made 14.5 psi at 6500 and i think it would have made close to 480+rw no problem.and my iat's would never go above 130 deg in 80 deg + weather.the after cooler kills some psi and i think it is a big restriction.not to mention it has hot water going to it all the time.unless you change it before every pass you make at the track.your car does not fall into this catagory.you have the A/A cooler.my car was tuned by monty johnson jmschip he is really good friends with sct's owner chris johnson.enuff said,that was with a mail order tune not even on his dyno
 
Last edited:

jp's performance

shooting for 11.60's N/A
S197 Team Member
Joined
May 18, 2007
Posts
479
Reaction score
0
Location
mass
That much hp with no meth/alchy or anything?
that's right blower only.you want the same tune i had call monty johnson at jmschip.com .thats who i got my tune from.i had the predator tuner that came with the kit and a tuner won't say who,tuned it to 404rw.bought a x cal2 from jmschip and first pull was 457rw.hows your 53 rw hp gain.just from switching tuners.but we all know dyno #'s don't mean shit.it's what it runs at the track.my car ran 11.6 at 119 on bias ply et streets.11.8 at 119 on bfg dr and 12.1 at 117 on the stock tire with 3.55's
 
Last edited:

V8SRGR8

Cunning Linguist
Joined
Feb 15, 2009
Posts
326
Reaction score
5
Location
Northern Virginia
LOL

Hey guys, the deal I was working on fell through, so this kit is back up for sale. I will be keeping the powerpipe and radiator extensions, so the complete kit will go for $2900 or $4400 installed and tuned.
 
Back
Top