Search results for query: *

  1. Badd GT

    Comp Cams 127400 Sound??

    I stumbled across the heads one day on eBay, iirc they were $800 bare. Place called coupe performance in Georgia did them. Guys name is Scott Milner, he’s still around. You also have Modular Head Shop up in Northern Florida you can check with.
  2. Badd GT

    Comp Cams 127400 Sound??

    Run 3 stock with CAI Run 7 with 127400 cams and longtubes Run 12 added delete plates Run 17 added p&p heads
  3. Badd GT

    Comp Cams 127400 Sound??

    I ran both the 400 cams and 500 cams on my car, na and supercharged and ultimately went with the 400’s. 400’s had better street manners and better under the curve power. Up top the 500’s made a few more horsepower. ( less than 10) and how much time do you spend above 6500 rpm where the 500’s...
  4. Badd GT

    Who still sells 11:1 pistons for the 4.6L 3V. The best I can find is 10.36:1.

    Brand new never used. I bought from member BruceH back in like 2014
  5. Badd GT

    Oil Drain Back???

    I lost an engine due to bad by pass spring in oil pump. I had the same issue of oil pressure good then no good. Figured it was bad gauge…… wrong, it was bad pump
  6. Badd GT

    Catastrophic engine damage?

    I built an engine basically the same way and it’s been running well for a few years with a DOB supercharger making 615 rwhp. Good solid budget build
  7. Badd GT

    Trouble Shifting In and Out of Reverse with a Hurst Short Throw Shifter.

    Hurst shifter is one of the first things I put in my car when I bought it, I had all kinds of shifter problems, and soon after replaced it with an MGW and had no problems after that at all
  8. Badd GT

    Trouble Shifting In and Out of Reverse with a Hurst Short Throw Shifter.

    MGW :)
  9. Badd GT

    Who still sells 11:1 pistons for the 4.6L 3V. The best I can find is 10.36:1.

    M3v220571F01
  10. Badd GT

    Who still sells 11:1 pistons for the 4.6L 3V. The best I can find is 10.36:1.

    I have a set of Mahle 11:1 .020 oversized forged 4032 pistons with rings and pins/retainers. It’s a matched set. Graphal (or something like that) skirt coating also $500 plus shipping they are yours
  11. Badd GT

    frame straightening s197' made contact with imovable object

    hope you have full coverage :( .308 round less than a dollar
  12. Badd GT

    How many miles is to many miles to cam a car?

    I have a set of Comp 127350 cams with about 2 hours run time on them if you’re interested. They do require new valve springs
  13. Badd GT

    Does anyone sell short blocks anymore?

    Your in Florida, I’d contact Modular Head shop and see if he knows any local reputable shops that could assemble one for you
  14. Badd GT

    Some mobile home questions

    Mobile homes are treated like cars and go down in value (depreciate). If at all possible buy a small house instead
  15. Badd GT

    Please help diagnose engine noise - S/C Roush 4.6L 3V

    https://iihs.net/fsm/?d=165&f=Camshaft%20-%20LH.pdf&p=1 read this
  16. Badd GT

    Please help diagnose engine noise - S/C Roush 4.6L 3V

    I changed my valve springs with heads on car. Used air compressor and spark plug air fitting tool to keep valves from dropping, You need a telescoping magnet and dab of axle grease to keep valve stem locks from dropping off. I used ford valve spring compressor (borrowed from dealership) and it...
  17. Badd GT

    WTB 06 coolant crossover

    I have one today’s your lucky day. I’m in Raleigh.
  18. Badd GT

    Comp cams low dyno numbers and check engine light

    The 500’s and 400’s dynos were for all purpose identicle. The power band on the 500’s was 500 rpm to the right. Personally I liked the drive ability of the 400’s better and for street use felt the power band more useable than the 500’s
  19. Badd GT

    Comp cams low dyno numbers and check engine light

    Run file 12 is where I was with your cams
  20. Badd GT

    Comp cams low dyno numbers and check engine light

  21. Badd GT

    Exhaust leak after shorty header install

    Getting aggravated yet?
  22. Badd GT

    Any tips for removing exhaust manifold studs?

    If you’re going to go thru the aggravation of putting headers on you should probably do long tubes. Those shorties will probably not change your engine performance at all.
  23. Badd GT

    Valve spring removal

    the top one looks similar to the one I borrowed from the local Ford dealer to do mine. Its pretty easy, get a little teloscoping magnet, it makes the spring retainers easier to keep track of. yes on replacing the seals while you are in there. A little dab of grease on the valve stems or...
  24. Badd GT

    Reman 4-piston Brembos on 05-14 GT

    I was poking around on Rock Auto the other day looking at brakes for 05-09 and they had a 4 piston setup that they advertise fits over 18" wheelshttps://www.rockauto.com/en/moreinfo.php?pk=11059248&cc=1432173&pt=13255&jsn=1044...
  25. Badd GT

    Vintage Muscle Cars

    The owner of the Shell station I worked at in high school ‘78-‘82 had a ‘63 split window vette with the rear spring set up you describe. Had 350 LT-1 in it with factory side pipes and Shell 78 series radials all the way around 12.8 1/4 all day long. The mechanics there had a ‘67 Malibu w/ L-88...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top