elevensies
Junior Member
- Joined
- Nov 4, 2021
- Posts
- 18
- Reaction score
- 4
Another with the matching front wheels
View attachment 80604
View attachment 80605
View attachment 80606
You have an auto? With 4.10s 1st will be useless.
It's a V6.
Some reading material:You have an auto? With 4.10s 1st will be useless.
But you said earlier it would be useless, not at all the caseOk I read the first 5 pages and they all said a gear change is worthless and doesn’t lower ets.
Sent from my iPhone using Tapatalk
It wen
But you said earlier it would be useless, not at all the case
You don't drag race in 4th? How about the 10R80 cars, crossing the line in 7th?
You've taken a general statement that these year cars don't gain anything from gears and completely neglected the fact this particular car has a motor that makes 280 lb-ft of torque and has a set of gears that are for reaching CAFE standards (2.73). A V6 2011+ car gains a lot from a gear swap.
You might finish in 4th sure but with steeper gears you’ll have to shift again and in the case of a 6r, which doesn’t have a 1:1, you’d be going into overdrive. And 7th is 1:1. And we’re not talking about the 10r80 anyway.
With a 1.14:1 4th gear, a 6800rpm redline, and a 28" tire, the car would have to exceed a 121mph trap speed to need to shift into 5th gear. Bump the shift point to 7000rpms and that V6 will be at 125mph! If he's trapping 125+ with a v6, he is doing pretty well.
And what you’re neglecting to take into account are the transmission ratios.
Nope, I accounted for that shit
Look at the foxes with a t5 and 2.73s. It was a slouch so 4.10s made a huge difference. But we’re not talking about those cars. We’re talking about a dohc v6 with variable valve timing to optimize power across the board and can rev out further than the older pushrod.
Bottom line is that it is still 280 lb-ft in a 3600lb car. But go ahead, ramble away...
First gear is numerically higher to get it off the line quicker and the numerically lower rear gears with close 3-4 allow you to stay in the power band for longer and can top out higher.
The idea of any drag race is to stay in the powerband the entire time so how does a 6R80 magically change that?
If first gear was numerically lower than it is I would agree with you.
Irrelevant, the car doesn't care what the numbers of first gear are, it cares how much force is being applied to make it accelerate, the more the better.
I’d like to see where the 11+ v6’s gain a lot of a gear swap. I’ve never seen that personally.
Google is your friend.
Sent from my iPhone using Tapatalk
For fucks sake,