alloy6ix
Wiener Dog Racer
Upper center right...Actual GT500 below:
Whoa, what steering wheel is that? with the breather looking material on it?? Is that off the real 2010 GT500?
2010 GT500 steering wheel/air bag in my 05
- Thread starter 19COBRA93
- Start date
Whoa, what steering wheel is that? with the breather looking material on it?? Is that off the real 2010 GT500?
19COBRA93
Ford Racing
Hard to say what that's from. It's a GT500, and initially I thought it was from Australia, or Canada... But it's a regular LH drive, and the speedometer reads in miles. Not sure what that is. Here's another pic of it. Might be pre-production.
alloy6ix
Wiener Dog Racer
Hard to say what that's from. It's a GT500, and initially I thought it was from Australia, or Canada... But it's a regular LH drive, and the speedometer reads in miles. Not sure what that is. Here's another pic of it. Might be pre-production.
Wow, I like that wheel.. Thanks for the full pic, I guess I'll be on the lookout for it then!
19COBRA93
Ford Racing
If you find it, let us know. I'm curious as well. It's not in any of my Ford applications so I don't know what/where it's from.
Edit: Nevermind, and good luck... It looks like this specific wheel is a "one-off" from the 07 GT500 Show Car. The red/white one that was whored out before these cars made production:
http://images.google.com/imgres?imgurl=http://images23.fotki.com/v870/photos/9/9586/3320577/ShelbyCobraGT500Show_39-vi.jpg%3F1159152533&imgrefurl=http://public.fotki.com/wackydave/car_related_reference/manufacturers-media-pics/ford_mustang_media_pics/shelbycobragt500show_39.html&usg=__RPe4U_m5m3ezK8gtqGedf0lP8P8=&h=533&w=800&sz=70&hl=en&start=31&um=1&tbnid=NSlPKq9QJQDxQM:&tbnh=95&tbnw=143&prev=/images%3Fq%3Dperforated%2Bgt500%2Bsteering%2Bwheel%26ndsp%3D18%26hl%3Den%26rls%3Dcom.microsoft:en-US%26sa%3DN%26start%3D18%26um%3D1
Last edited:
alloy6ix
Wiener Dog Racer
Lol, I figured as much seeing as how you work for Ford and couldn't find it, it's gotta be a one off model. I think that wheel with the thumb inserts would sell quite a bit!! But yes, I do remember those whored out shots all too well. haha.
NotQuik
I can't drive
i'm assuming it could be done using an aftermarket unit as well..
rford426
Resident 5.0 H8R
You guys should look into racecar wheels look alot better than those and a funcional mod!! Take your steering wheel in with you! This is what i want
http://www.erzperformance.com/ProductDetails.asp?ProductCode=ST-006S
http://cgi.ebay.com/ebaymotors/CB-N...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
http://www.erzperformance.com/ProductDetails.asp?ProductCode=ST-006S
http://cgi.ebay.com/ebaymotors/CB-N...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
rush_junky
07SGT0881
Finished installing the 2010 GT-500 Steering Wheel !!
I had to use the connector from the old steering wheel and the harness from the new one.
Cruise Control Splicing:
Old Connector >>> New Harness:
white >>> gray
blue >>> brown
red >>> red (pwr)
green >>> black (gnd)
The resistance between the new harness gray and brown wires is as follows as each button is pushed:
OFF = 0 ohms
ON = 1500 ohms
RESUME = 1000 ohms
SET (-) = 300 ohms
SET (+) = 600 ohms
Music Controls: (I don't have these working yet; however, this is the resistance between the new harness green and purple wires as each button is pushed)
Music Icon = 510 ohms
VOL (-) = 50 ohms
VOL (+) = 120 ohms
|<< = 335 ohms
>>| = 210 ohms
Phone Controls: (I don't have these working yet; however, this is the resistance between the new harness yellow and blue wires as each button is pushed)
Speaker Icon = 50 ohms
OK = 335 ohms
Phone Icon = 510 ohms
There is a 2nd connector receptacle on the steering wheel hub that may come in handy for the music and phone control wiring.
I had to use the connector from the old steering wheel and the harness from the new one.
Cruise Control Splicing:
Old Connector >>> New Harness:
white >>> gray
blue >>> brown
red >>> red (pwr)
green >>> black (gnd)
The resistance between the new harness gray and brown wires is as follows as each button is pushed:
OFF = 0 ohms
ON = 1500 ohms
RESUME = 1000 ohms
SET (-) = 300 ohms
SET (+) = 600 ohms
Music Controls: (I don't have these working yet; however, this is the resistance between the new harness green and purple wires as each button is pushed)
Music Icon = 510 ohms
VOL (-) = 50 ohms
VOL (+) = 120 ohms
|<< = 335 ohms
>>| = 210 ohms
Phone Controls: (I don't have these working yet; however, this is the resistance between the new harness yellow and blue wires as each button is pushed)
Speaker Icon = 50 ohms
OK = 335 ohms
Phone Icon = 510 ohms
There is a 2nd connector receptacle on the steering wheel hub that may come in handy for the music and phone control wiring.
19COBRA93
Ford Racing
For anyone interested in purchasing one of these, the price has gone up a bit, but I can still sell them for $300 shipped. Ford updates their pricing on the 1st of every month so the price can go up at just about anytime throughout the year.
EagleStroker
N/A Junkie
Speaking of steering wheels, I wasn't able to take a picture but at PRI I saw Grant is going to release a steering wheel that keeps the airbag in the Spring. Said retail should be $199, it was very nicely done with nice grips and what not. Just thought I would share 
EagleStroker
N/A Junkie
Yup. They will also be offering a replacement center section with different emblems or you can use the stock piece.
EagleStroker
N/A Junkie
It's that in Ford form if you can imagine. It's a cross between that and the '10 steering wheel, you can pick the color bolster but the T section has the split spoke like the ones in this thread. I asked them to call me when they were ready to sell it was a very nice piece!
19COBRA93
Ford Racing
As an airbag delete? The center section is part of the airbag.
Similar threads
Support us!
Support Us - Become A Supporting Member Today!
Click Here For Details
Sponsor Links
